Warning: readfile(/services/webpages/t/j/tjsnow.com/public/logo_only.txt): failed to open stream: No such file or directory in /home/content/t/j/s/tjsweb/html/supplies/cables_shunts_connectors/laminated_shunts.htm on line 15

Laminated Shunts

Because of the custom nature of Laminate shunts, each one must be individually specified.

The best (and easiest) way for you to request a quote or order a laminated shunt is to print our our Shunt Ordering Sheet (Adobe Acrobat Format

181K), fill it out, and fax it in to us here at T. J. Snow. We will follow up with pricing and delivery options.

The following information must be specified for each shunt when ordering:
1. Shunt Type (Shape)
2. Shunt Thickness (not counting the end clip)
3. Shunt Lamination thickness (each; i.e. .005, .010)
4. Shunt Width
5. Shunt Length (outside length)
6. Hole Diameter
7. Hole Pattern (pattern letter)
8. Hole Dimensions (X, Y, Z)
9. End Treatment (clip, solder, etc.)

Shunts or normally supplied with their ends secured by riveted copper clips, and are made from high conductivity copper.

Common Shunt Shapes:

Less Common Shunt Shapes:
Lesser Used Shunt Shapes

Shunt Types and how to measure them correctly

Letter Style Measurements

F Straight Shunt Overall length is measured from end to end.

L L Shaped Shunt Overall length is measured along the outer edge, end to end.

C C Shaped Shunt Overall length is measured from end to end along the outside edge of the shunt. Dimension A is measured from when the shunt is in the folded position and is the dimension from outer edge to outer edge-- across the open face of the shunt.

J J Shaped Shunt Start with the same two dimensions of the C shunt... And add the additional measurement B-- the distance offset between the two shunt faces (the additional length of the longer side).

Hole Patterns
Letter Pattern Picture

A One hole centered Shunt End Type A

B Two holes on top of each other Shunt End Type B

C Two holes beside each other Shunt End Type C

D Four holes square pattern Shunt End Type D

Remember that custom laminated shunts are not a problem. The shunt specifying sheet includes an area for you to sketch your custom needs. T. J. Snow will be happy to help you work through any needs you have.

**Shunt Types and how to measure them correctly**
Letter	Style	Measurements
F	Straight Shunt	Overall length is measured from end to end.
L	L Shaped Shunt	Overall length is measured along the outer edge, end to end.
C	C Shaped Shunt	Overall length is measured from end to end along the outside edge of the shunt.	Dimension A is measured from when the shunt is in the folded position and is the dimension from outer edge to outer edge-- across the open face of the shunt.
J	J Shaped Shunt	Start with the same two dimensions of the C shunt...	And add the additional measurement B-- the distance offset between the two shunt faces (the additional length of the longer side).

**Hole Patterns**
Letter	Pattern	Picture
A	One hole centered
B	Two holes on top of each other
C	Two holes beside each other
D	Four holes square pattern

Warning: readfile(/services/webpages/t/j/tjsnow.com/public/contact_wht.txt): failed to open stream: No such file or directory in /home/content/t/j/s/tjsweb/html/supplies/cables_shunts_connectors/laminated_shunts.htm on line 168

Warning: readfile(/services/webpages/t/j/tjsnow.com/public/supplies/cables_shunts_connectors/cables_shunts_conn_menu.txt): failed to open stream: No such file or directory in /home/content/t/j/s/tjsweb/html/supplies/cables_shunts_connectors/laminated_shunts.htm on line 169