Model PC100

Features:

• Increases 105/106 Controllers:
• Weld Schedules from 3 to 128 Weld Schedules
• Cascade Capability from 3 to 396 Steps
• Gun Selection from 3 to 14 Weld Guns
• Contactor Selection from 3 to 6 Contactors
• Adds:
• A Finished Parts Counter
• Direct Tie-in to the Model 375 Interlock Scanner
• Absolute Repeatability
• Quartz Crystal Accuracy
• Space Age Design and Rugged Construction

• Any WELD SCHEDULE may be selected as a timing device. With HEAT TIME set at "00" timing from 1/60 of a second to 15 seconds can be set.
• The PAUSE instruction is used to execute TIME events from an external timer.
• Dual palm button ANTI-TIEDOWN mode requires joint depressing of two palm buttons.
• TWO STAGE foot switch energizes or releases STEP 1 with FIRST STAGE initiation of the foot switch.

SPECIFICATIONS

STEPPER:

CASCADE from 1 to 396 STEPS

WELD SCHEDULE:

Program 128 WELD SCHEDULES of model 105/106 controller brain panel weld parameters.

WELD PROGRAM:

PROGRAM #1 contains 99 STEPS and 32 WELD SCHEDULES

PROGRAM #2 contains 99 STEPS and 32 WELD SCHEDULES

PROGRAM #3 contains 99 STEPS and 32 WELD SCHEDULES

PROGRAM #4 contains 99 STEPS and 32 WELD SCHEDULES

CONDITIONAL BRANCHING:

The PROGRAMS may be externally LINKED by external PROGRAM SELECT switches to sequentially execute all 396 STEPS.

CONDITIONAL INSTRUCTIONS:

"PAUSE" in that STEP until LS1 is closed.

"SKIP" the next STEP if LS2 is closed.

"HALT" in that STEP if LS3 is closed.

"REPEAT" in that STEP if LS4 is closed.

RELAYS AND AIR VALVE OUTPUTS:

1 to 14 OUTPUTS may be enabled to become energized in any STEP.

GUN valves will stay ON from SQUEEZE time through HOLD time.

SHUTTLE valves and RELAYS for machine control will stay on for the entire STEP time.

CONTACTOR OUTPUTS:

1 of 6 CONTACTORS may be selected to execute the WELD SCHEDULE selected for that STEP.

 

 

Physical Specifications:

• Operating Temperature: 0-50 Degrees Centigrade
• Cabinet Dimensions: 16"h x 20"w x 11"d

Intertron Products:
Single Phase: 100 | PC100 | 105 | 108 | 109A | IN200/300 | 375 | 1000
Three Phase: 301B | 302A | 302C | 375
Other Controls | Welding Supplies | Return to T. J. Snow

Contact Information:	6207 Jim Snow Way P. O. Box 22847 Chattanooga, TN 37422	(423) 894-6234 1-800-NOW-SNOW FAX (423) 892-3889 ORDER FAX (423) 490-2417
	welders@tjsnow.com