|
|
For
many years, deoxidized phosphorus copper (DHP) was the preferred alloy
for contact tips because of its low cost and availability - it is still
in widespread use today. However, for more demanding applications
requiring high wear characteristics and resistance to softening, other
alloys can give a superior performance and are better suited for the
most rigorous arc welding conditions.MIG-contact tips are available in a choice of alloys:
with little or no additional cost has been proven multiple times.  Luvata Contact Tips PDF Brochure (500kb)Contact Inside Sales at T.J. Snow or arrange to have a territory manager come visit to discuss your application. | This same material can be applied to:
|
Tubes for Contact TipsAs part of the welding range of products, Luvata produces tubes for contact tips. We use a manufacturing process whereby the final drawing operation is through a die and mandrel. Since the mandrel determines the size and shape of the bore, the process guarantees an exceptionally tight diameter and a smooth surface finish for the bore.Since the bore does not need to be calibrated, this leads to a cost saving for the tip manufacturer, as well as fewer interruptions for the welder when in operation. |  |
| Contact
Information: |
120 Nowlin Ln
P. O. Box 22847 Chattanooga, TN 37422 |
(423)
894-6234
1-800-NOW-SNOW FAX (423) 892-3889 ORDER FAX (423) 490-2417 |
 |
welders@tjsnow.com |
