Portable Force Gauge -- MM-601A

T.J. Snow > Supplies > Miyachi > MM-601A

Portable Force Gauge
MM-601A

Puts digital accuracyat your fingertips

The MM-601A is a portable electrodeforce measuring device for resistance welding machinery. By changing betweenthree load cell sensors, it is possible to measure forces between .44 to2111 lbs. (.2 kg to 950 kg). The compact microprocessor based design allowsfor easy access to most welding machines and guarantees the greatest degreeof measuring accuracy.

Features:

Simple microcomputer based operation
Wide measurement range
Large, easy to read liquid crystal digitaldisplay show both measured value and units.
One-touch zeroing to any arbitrary point
One-touch hold (and external hold input)
Automatic determination of measurementrange
Portable and easy to carry
Front Panel highly resistant to oilmist and dust.
Automatic-off saves rechargeable batteries
External analog output can be used forpressure wave form analysis

**Specifications of the MiyachiBrand MM-601 Portable Force Gauge**
Measurement:	Range:	.44 - 21.1 lbs. (.2 - 9.5 kg) usingthe MA-520 load cell 4.4 - 211 lbs. (2 - 95 kg) usingthe MA-521 load cell 44.4 - 2111 lbs. (20 - 950 kg) usingthe MA-522 load cell Load cell sensors sold separately.
	Accuracy:	± 3% against the full scale
	Speed:	Approximately 4 times/second
	Allowable Maximum instantaneouspressure:	150% of full scale
	Display functions:	Decimal point and unit are automaticallyset according to the measurement range. “OVER II” is displayed and an alarmchimes to signal an overload of the unit. “BATTERY” is flashed on the displayto signal that the battery needs recharging.
	Auto Power off:	The unit will shut its self offafter approximately 7 minutes of inactivity.
	Holding Input:	Freezing of the display is possibleat any time during measurement by pushing the “HOLD” button.
	Analog Output:	Voltage output 4 mV, 3% per count.Load resistance 5 k-ohms or greater.
	Power Supply:	4 Ni-Cd batteries, 1.2V (total of4.8 volts). Batteries last for approximately 5 hours of continuous use. Charger MA-510 is included.
	External Dimensions:	6.7 in. (H) x 2.9 in. (W) x 1.2in (D) 170 mm (H) x 76 mm (W) x 30 mm (D)
	Weight:	1.07 lbs. (480g), including 4 Ni-Cdcells

Largerpicture of the MM-601A portable pressure gauge along with two load cells:
Miyachi MM-601 Portable force gauge
For further information, pleasecontact T. J. Snow. We will be glad to helpyou select the correct force gauge for your application and budget.

We also carry a full line of WeldCheckers.

Contact Information:	6203-6207Jim Snow Way P. O. Box 22847 Chattanooga,TN 37422	(423)894-6234 1-800-NOW-SNOW FAX (423) 892-3889 ORDER FAX (423)490-2417
	welders@tjsnow.com